Gorilla Wood Glue is a high-performance, water-based PVA adhesive formulated specifically for wood bonding. It provides exceptional holding power and a clean finish thanks to its natural color when dry. With a capacity of 532 ml, this bottle is ideal for larger wood projects, covering approximately 17 m² of bonding surface.
D3 Water Resistance – suitable for outdoor use
Natural color when dry – for clean, invisible glue lines
Fast setting – 20–30 minutes of clamp time
Full strength in 24 hours
User-friendly – one-handed open/close cap
Multi-purpose – perfect for professionals and hobbyists
Instructions for Use
1. Prepare the Surface
Ensure surfaces are clean and dry. If the glue appears thickened or separated, shake vigorously to restore consistency.
2. Apply the Glue
Apply generously to one or both surfaces depending on the project. Press the parts together and clamp for 20–30 minutes. Allow the bond to fully cure for 24 hours. Excess glue can be wiped off with a damp cloth before it dries.
3. Clean-up
Use a clean, damp cloth to remove wet glue. Dried glue can be scraped off with a knife or sanded down. Always clean the applicator tip after use and store the bottle tightly closed at room temperature.
Frequently Asked Questions (FAQ)
Can Gorilla Wood Glue be used on wet wood?
No. Gorilla Wood Glue should be used only on dry surfaces. For bonding wet or damp wood, we recommend using Gorilla Polyurethane D4 Wood Glue.
What materials is Gorilla Wood Glue suitable for?
It is designed for hardwoods, softwoods, plywood, MDF, chipboard, paper, and cork.
How long does it take for Gorilla Wood Glue to fully cure?
Clamp for 20–30 minutes. Full strength is reached after 24 hours.
Is Gorilla Wood Glue suitable for outdoor use?
Yes. With certified D3 water resistance, it can be used outdoors. However, it is not intended for continuous water exposure.
What is the shelf life once opened?
If stored properly (cool and dry place), opened Gorilla Wood Glue can last up to 12 months.
How do I remove Gorilla Wood Glue from skin?
As it is water-based, simply wash with soap and warm water.
What if the tip is clogged?
Remove the cap and gently push out the dried glue using a toothpick. Rinse with warm water and reattach.
Let me know if you'd like to continue with the next product.
