Crystal Clear Waterproof Coating:
Gorilla Waterproof Coat & Seal Crystal Clear formula is ideal for repairs where long-lasting waterproof sealing is required while maintaining appearance. The flexible, rubber-like coating easily fills small cracks, gaps, and joints, providing reliable protection both indoors and outdoors. It dries clear, so it does not cover the original surface and allows for discreet repairs.
Thanks to its self-leveling properties, the coating spreads smoothly, fills uneven areas, and forms a continuous waterproof layer. It can be used on dry and slightly wet surfaces, enabling quick repairs on leaking windows, roof elements, or gutters. The coating is UV- and temperature-resistant, ensuring long-term protection against weather conditions.
FEATURES:
– Crystal clear, transparent drying finish
– Flexible, rubberized layer sealing water, air, and moisture
– Designed for localized repairs
– Self-leveling formula
– Usable on wet and dry surfaces
– Weather-, UV-, and temperature-resistant
– Application temperature: 10–48 °C
– Temperature resistance after curing: −40 °C to +60 °C
– Crack filling: up to 6 mm
– Low odor
– Paintable after drying
– Can be applied by brush, roller, or pouring
Instructions for use:
Preparation: Surface must be clean and free of dust, oil, and grease. Not intended for large-area coating.
Mixing: Stir for approx. 30 seconds before use until fully homogeneous.
Application: Apply with brush, roller, or by pouring. Do not fill gaps larger than 6 mm. Remove excess immediately.
Layering: Apply multiple layers if needed. Allow drying between coats.
Curing time: Full cure: 24–48 hours. Forms a glossy, rubber-like transparent layer.
For maximum protection, apply in multiple layers, allowing each layer to fully dry before the next.
Coverage depends on surface type and number of layers. A 473 ml can covers approximately 2–3 m² per coat.
FREQUENTLY ASKED QUESTIONS (FAQ)
What surfaces can it be used on?
Window frames, PVC, RVs, gutters, pipes, and exterior structures.
Does it dry clear?
Yes, it forms a crystal clear, glossy layer.
Can it be used on wet surfaces?
Yes, on slightly wet surfaces.
What size cracks can it fill?
Up to 6 mm.
What is the temperature range?
Application: 10–48 °C, after curing: −40 to +60 °C.
Can it be painted?
Yes, after full curing.
Can it be used underwater or under pressure?
No, it is not suitable for continuous underwater use or pressurized system
